[Recovery] ClockWorkMod CWM

User avatar
STANDARD DISCLAIMER:
USE AT YOUR OWN RISK. By running this firmware, you agree that there is the possibility that you may brick your device. You agree that only you are responsible and no one else is responsible for supporting you if that occurs. (although the community is great at providing help to you!)CREDITS
Thanks to Mlais for bringing CWM to H7500+ PhoneWhat is it?
Custom recoveryHow to install
Drivers
  1. Start c/windows/system32/hddwiz.exe (as admin)
  2. Click next
  3. Manually select hardware
  4. List all devices
  5. Select the driver (for example usb2ser_Win764.inf)
  6. from the List select "MediaTek Preloader USB VCOM Port"

Firmare
  1. Now run Flash_tool.exe as administrator
  2. In the SP flash tool now select "Scatter loading" located near the top right of the program
  3. Select the file called "MT6577_Android_scatter_emmc.txt" from within the firmware folder
  4. Remove the battery from your phone
  5. On your PC in the SP flash tool, hit the download button
  6. Click yes when warned that not all options selected
  7. The tool will now begin searching for your phone
  8. Connect the usb cable to the phone with the battery removed
  9. Insert the battery into your phone to begin the flash process
  10. Once finished a small box with a green circle will pop up and tell you "Download OK"

Boot Phone
  1. Now Remove the battery from your phone
  2. Unplug the USB cable from your phone
  3. Replace the battery after 5 seconds or so
  4. Replace the back case of your phone
  5. Now turn your phone on and wait for first boot to complete
Downloads
Rom http://flashmyandroid.mediafire.com/?iuoou3vn42pd4f5
FlashTool http://flashmyandroid.mediafire.com/?p7d122d9sol472c

[Recovery] ClockWorkMod CWM


After you flash the recovery rom:
- Recovery Mode: Power + VolUp
- Factory Mode: Power + VolDown

[Recovery] ClockWorkMod CWM


good article ,it really useful for us

You need to be logged in to the site to leave comments.

Login  •  Register



Return to “OEM Zopo ZP810 / H7500+ Development”



Who is online

Users browsing this forum: No registered users and 2 guests