[RECOVERY] Fun ClockWorkMod + UserData Partition Size

User avatar
USE AT YOUR OWN RISK. By running this firmware, you agree that there is the possibility that you may brick your device. You agree that only you are responsible and no one else is responsible for supporting you if that occurs. (although the community is great at providing help to you!)

[/b]Thanks to the skilled work of fun_ Rockchip tablets now have a recovery that can flash the boot.img and kernel.
fun_ site for more information http://androtab.info

1. Requirements:

  1. Rockchip Batch Tool v1.6 (DOWNLOAD)
  2. One of the CWM images in this download
  3. Windows PC
  4. USB Cable

2. Initial setup

  1. Extract the Batch Tool (RBT in the following) package. It includes the needed drivers too!
  2. Extract the downloaded firmware image
  3. Run RBT, and browse the image file in
  4. If everything done right, you should see some info printed in the fields, like the current version of the firmware, Android, the board (RK30), etc

3. Installing device drivers

  1. Press back key for a few seconds and then press reset at same time.
  2. As Windows notices the new device, release the back button.
  3. When asked for drivers, browse to the extracted RBT directory, select the directory "Drivers", and let Windows install the matching ones
  4. When finished, you should see one of the fields in RBT turngreen from grey

4. Installing the new firmware

  1. After plugging in the tablet, and the green field pops up on the bottom, press the "Restore" button
  2. You should see the text Download firmware start.
  3. If everything done right, you should see a message like this:
  4. **********Upgrade Done Success<1> Fail<0> Timems**********
  5. If it finished without a problem, the tablet should boot up immediately. If not, just press the power button, and wait until it boots.


  1. Pipo_M1_CWM_1GIG.zip (Fun_ CWM and 1 gig userdata partition)
  2. Pipo_M1_CWM_2GIG.zip (Fun_ CWM and 2 gig userdata partition)
  3. Pipo_M1_CWM_4GIG.zip (Fun_ CWM and 4 gig userdata partition)

[RECOVERY] Fun ClockWorkMod + UserData Partition Size

Sorry,Why All install APPS will missing after CWM backup?

You need to be logged in to the site to leave comments.

Login  •  Register

Return to “Pipo Max M1 Recovery”

Who is online

Users browsing this forum: No registered users and 1 guest