[RECOVERY] ClockWorkMod v5.5.0.4 Touch&Non Touch(10/24/12)

User avatar
LAST UPDATE: 10/24/12

STANDARD DISCLAIMER:
USE AT YOUR OWN RISK. By running this firmware, you agree that there is the possibility that you may brick your device. You agree that only you are responsible and no one else is responsible for supporting you if that occurs. (although the community is great at providing help to you!)

Acknowledgments
Vurrut, this is a port of their RK29xx work.

Compatibility
Check the CWM link for list of RK3066 tablets

Installation
1. Shutdown your tablet

2. Select appropriate base for your tablet from the download link and unzip to your desktop.

3. Put the CWM rom you wish to install in root of external sdcard

4. Insert the sdcard into your tablet.

5. Run RKAndroidtool.exe from the folder you extracted on your desktop
[ATTACH=CONFIG]388[/ATTACH]

6. Deafult installation is 1gig system space if you want 2 gig click the white box next to parameter entry and in rom folder select parameter2g.
[ATTACH=CONFIG]386[/ATTACH]

7. Enter flashmode on your tablet and insert usb cable.

8. When the tool finds your tablet click erase NAND
[ATTACH=CONFIG]389[/ATTACH]

9. It may just copy parameter file and reboot normal. If it does dont worry and go back to step one.

10. After format is complete and you click ok without reboot then click Flash ROM
[ATTACH=CONFIG]387[/ATTACH]

11. When complete it will boot into CWM

12. Remove USB cable and close RKAndroidtool

13. In CWM select install zip from sdcard

14. Select choose zip from sdcard

15. Scroll to the rom you are installing and select

16. Process takes ~10 minutes

17. It will say complete but is not complete until it returns to menu...patience

18. When returned to menu select go back

19. select reboot system now.


IT MAY SEEM IF TABLET HAS LOCKED UP ON INSTALLING SYSTEM. IT HAS NOT, IT JUST TAKES TIME!


Downloads
(updated 10/24/2012) Link:http://www.mediafire.com/?n71udcj26hfdr
Last edited by Tab_Modder on Sat Oct 27, 2012 11:39 pm, edited 1 time in total.

[RECOVERY] ClockWorkMod v5.5.0.4 Touch&Non Touch(10/24/12)

User avatar
I need this tested.

I would prefer installation of Decontaminate first then CWM.

The reason is some ROMs of this family have the kernel in the boot.img and recovery.img so I am not sure what if anything is in the kernel partition which is needed for this cwm.

[RECOVERY] ClockWorkMod v5.5.0.4 Touch&Non Touch(10/24/12)


After ClockWorkMod Installation the adb mode will be disable?
I have to use only the ClockWorkMod? I am asking this because the proceedure to enter in ADB mode and ClockWorkMod are the same, VOL+ button and power button.
Please advice!!

[RECOVERY] ClockWorkMod v5.5.0.4 Touch&Non Touch(10/24/12)

User avatar
[quote=lambrou]After ClockWorkMod Installation the adb mode will be disable?
I have to use only the ClockWorkMod? I am asking this because the proceedure to enter in ADB mode and ClockWorkMod are the same, VOL+ button and power button.
Please advice!![/quote]

Sorry will fix op after work. It is actually vol -

Sent from my Galaxy Nexus using Tapatalk 2

[RECOVERY] ClockWorkMod v5.5.0.4 Touch&Non Touch(10/24/12)


Hi, I'm looking to get CWM on my Ployer Momo11 Speed. I've currently got it rooted and running the latest firmware which I got fro the Ployer.cn site, but I want to install your Decontaminate ROM on it. So my question is, will I be able to install CWM and also use Decontaminate ROM? If so which version do I need to use?

[RECOVERY] ClockWorkMod v5.5.0.4 Touch&Non Touch(10/24/12)


[quote=VIPER]Hi, I'm looking to get CWM on my Ployer Momo11 Speed. I've currently got it rooted and running the latest firmware which I got fro the Ployer.cn site, but I want to install your Decontaminate ROM on it. So my question is, will I be able to install CWM and also use Decontaminate ROM? If so which version do I need to use?[/quote]

Can you provide a mirror for the firmware? We are having some difficulty getting it from the Ployer site. Once we have the original firmware our devs can create CWM for your tablet and you can try some of the ROMs around here.

[RECOVERY] ClockWorkMod v5.5.0.4 Touch&Non Touch(10/24/12)


Sorry about the delay, here is a mirror to the firmware I am currently running on my Momo11 Speed

https://www.dropbox.com/sh/0edw2l6va9q4kdi/N0a_UGJP0H
Phone: HTC Sensation XE
Tablet: Ployer Momo11 Speed

[RECOVERY] ClockWorkMod v5.5.0.4 Touch&Non Touch(10/24/12)


[quote=VIPER]Hi, I'm looking to get CWM on my Ployer Momo11 Speed. I've currently got it rooted and running the latest firmware which I got fro the Ployer.cn site, but I want to install your Decontaminate ROM on it. So my question is, will I be able to install CWM and also use Decontaminate ROM? If so which version do I need to use?[/quote]

No problem.

I have do it. Dont worry.

My tablet was MOMO11二代 (second ed.) and everything ok.


About cwm, i was try this one and other one no touch. They let do backups but dont let me restore anything, that say: md5 mismatch.

[RECOVERY] ClockWorkMod v5.5.0.4 Touch&Non Touch(10/24/12)


Hi there.
First thanks for all your work.
I've got some issues after 10 , my U9GT3 don t ' want to boot in CWM and i don t know why :S
The screen is on but nothing happens.
i might have take the wrong base ?
Wich one is good for u9GT3 please ?

Thanks for your time to help me ( i'm new in this android world )
Last edited by Fritenzza on Sun Nov 25, 2012 5:52 am, edited 1 time in total.

You need to be logged in to the site to leave comments.

Login  •  Register


Return to “Rom Development”



Who is online

Users browsing this forum: No registered users and 1 guest