[ROM] Decontaminated V3.0 (11/23/12)

User avatar
Images

[ATTACH=CONFIG]308[/ATTACH][ATTACH=CONFIG]309[/ATTACH][ATTACH=CONFIG]310[/ATTACH]


STANDARD DISCLAIMER:
USE AT YOUR OWN RISK. By running this firmware, you agree that there isthe possibility that you may brick your device. You agree that only you are responsible and no one else is responsible for supporting youif that occurs. (although the community is great at providing help to you!)

What is it?


[FONT=Verdana]This ROM / Firmware is based from the Pipo stock firmware. It has volume and screenshot controls on the status bar. I will be making mods to attempt to make sure all features work on all supported RK3066 tablets. I will also be making tweeks to attempt to improve system performance.[/FONT]
Howto install Decontaminate


  1. Download the latest ROM from downloads link below and put in the root of microSD card and insert into your tablets sdcard slot. (this file must stay in the zip format)
  2. Download the latest Base from the downloads link below and put on your desktop. Extract the zip file to your desktop. (If your positive you already have the latest base on your tablet you can use reboot recovery and skip to step 12)
  3. Shutdown your tablet
  4. Run RKAndroidtool.exe from the folder you extracted on your desktopImage
  5. Default installation is 1gig system space if you want 2 gig click the white box next to parameter entry and in rom folder select parameter2g.Image
  6. Enter flashmode on your tablet and insert usb cable. (you may have to install the drivers if you have not flashed your tablet before)
  7. When the tool finds your tablet click erase NANDImage
  8. It may just copy parameter file and reboot normal. If it does dont worry and go back to step one.
  9. After format is complete and you click ok without reboot then click Flash ROMImage
  10. When complete it will boot into CWM
  11. Remove USB cable and close RKAndroidtool
  12. In CWM select install zip from sdcard
  13. Select choose zip from sdcard
  14. Scroll to the rom you are installing and select
  15. Process takes ~10 minutes
  16. It will say complete but is not complete until it returns to menu...patience
  17. When returned to menu select go back
  18. select reboot system now.

IT MAY SEEM IF TABLET HAS LOCKED UP ON INSTALLING SYSTEM. IT HAS NOT, IT JUST TAKES TIME![FONT=Verdana]

Respect
[/FONT]
[FONT=Verdana]Please do not mirror the firmware / ROM. I analyze the downloads to determine which tablets to keep and which to drop. I am fine if repost this entire post elsewhere as long as you change the mediafire download link to link back to this thread.[/FONT]
Downloads

Base http://www.mediafire.com/?n71udcj26hfdrRom http://www.mediafire.com/?u1q76ap2bftb5V3.0
New Base – update_DS973H_PIPO_M2_20121108.img
Added CIFS support
Autoload all .ko files in /modules folder on boot

V2.4[FONT=Verdana]Added init.d support
Added 4.2 apps
[/FONT]
V2.3[FONT=Verdana]Minor changes to make compatible with MK808
[/FONT]
V2.2[FONT=Verdana]Build.propfix so we can find the games we can now play
[/FONT]
V2.1[FONT=Verdana]Gamelof tFix - Credit to Christian Troy for the patch! Christian accepts donations [/FONT]here![FONT=Verdana][/FONT]V2.0[FONT=Verdana]New base [/FONT][FONT=Verdana]PIPOM23G_120924 [/FONT][FONT=Verdana]-OFFICIAL Base
[/FONT]
V1.5[FONT=Verdana]Improved battery savings[/FONT][FONT=Verdana]Faster wifi speeds[/FONT][FONT=Verdana]Improved overall performance[/FONT][FONT=Verdana]Improved steaming video
[/FONT]
[FONT=Verdana]Google earth location fixed[/FONT][FONT=Verdana]MD5checksum txt file added[/FONT]V1.4
[FONT=Verdana]Fixed google voice search
[/FONT]

V1.3
[FONT=Verdana]Update to PIPO_M1_20120828 - OFFICIAL Base
[/FONT]

V1.2
[FONT=Verdana]Fixed SDcard permissions
[/FONT]
V1.1[FONT=Verdana]Added Back Stock Gallery because it contains camera[/FONT][FONT=Verdana]Removed stock widgets from Launcher workspace[/FONT][FONT=Verdana]AdFree included[/FONT][FONT=Verdana]Fixed Permissions for multitouch[/FONT][FONT=Verdana]Market permission fix[/FONT][FONT=Verdana]Market Build.prop fix[/FONT][FONT=Verdana]Slowed WIFI scan to save batteryV1.0
[/FONT]

V1.0
[FONT=Verdana]Initial Release[/FONT]
Last edited by Tab_Modder on Sat Nov 24, 2012 11:21 pm, edited 1 time in total.

[ROM] Decontaminated V3.0 (11/23/12)

User avatar
I need confirmation this boots fine on n101 I do not have this tablet but I am pretty confident it will work. It is a port of decontaminate for other rk3066 tablets

http://www.flashmyandroid.com/forum/...ll=1#post12568

once I receive confimation it boots I will build this section and port other roms such as the metro

[ROM] Decontaminated V3.0 (11/23/12)


Just downloaded and flashed this firmware on my Yuandao N101 1st batch. The firmware works fine. The high pitch sound when brigthness is not on max is a bit more than on beta firmware from yuandoa.
/JD

[ROM] Decontaminated V3.0 (11/23/12)

User avatar
[quote=Luxor]Just downloaded and flashed this firmware on my Yuandao N101 1st batch. The firmware works fine. The high pitch sound when brigthness is not on max is a bit more than on beta firmware from yuandoa.
/JD[/quote]

Luxor, thanks for confirmation that this booted fine.

WOW on the high pitch sound...and the yuandoa does this as well. I have to assume its the kernel because that is all I kept from stock. Everything else is used in other tablet roms I have put out as well.

Do you know if there are other tablets firmware that works on this tablet.

[ROM] Decontaminated V3.0 (11/23/12)


I have only tried Vondroid firmware and Finless firmware, and both have JB firmware with high pitch tone. But i have read some where that Evolution Prime from the U30GT should work as well.

[ROM] Decontaminated V3.0 (11/23/12)

User avatar
updated to 1.5

[ROM] Decontaminated V3.0 (11/23/12)


firmware does not work [ROM] Decontaminated V1.5 (10/13/12), the screen flicker even vystovlennoy maximum brightness, the tablet N101 second revision, with two speakers on the sides of the screen, not the second version.

[ROM] Decontaminated V3.0 (11/23/12)


[quote=Tab_Modder]updated to 1.5[/quote]

firmware does not work [ROM] Decontaminated V1.5 (10/13/12), the screen flicker even vystovlennoy maximum brightness, the tablet N101 second revision, with two speakers on the sides of the screen, not the second version.

[ROM] Decontaminated V3.0 (11/23/12)


Can you add CWM, like in http://vondroid.com/threads/cfw-vondroid-n101-v4-0.1013/ into your own firmware?
It ClockWorkMod 5.5.0.4
Last edited by bvm4by on Tue Oct 16, 2012 11:31 am, edited 1 time in total.

[ROM] Decontaminated V3.0 (11/23/12)

User avatar
[quote=bvm4by]Can you add CWM, like in http://vondroid.com/threads/cfw-vondroid-n101-v4-0.1013/ into your own firmware?
It ClockWorkMod 5.5.0.4[/quote]

Sure...hope I don't forget and will get in next release

You need to be logged in to the site to leave comments.

Login  •  Register



Return to “Yuandao (Window) N101”



Who is online

Users browsing this forum: No registered users and 1 guest